Muljuriga niidukid GMD

  • GMD
  • GMD 20
  • GMD liblikniidukid
  • GMD 3510
  • GMD 310

High mowing output often comes from using a front-mounted disc mower.

This new mower is designed for medium-sized tractors. It has numerous developments in ergonomics and mechanical robustness: greater operating comfort for setting to work / transport position, easier access to greasing points, reinforced chassis and revised drive train.

Nutrient-rich, palatable forage is essential for your farm. Clean-cut, gentle mowing reduces contamination by impurities while preserving plant cover on your grassland areas. That’s why GMD 310 F mowers come with:

  • significant lateral and vertical travel range for great ground contour following,
  • simplified ground pressure adjustment by two springs and a cylinder,
  • 4 drums for narrow swathing so that the tractor can pass over cut forage.

The unique chassis design improves visibility so that you can work in total safety.

This new GMD mower is the perfect choice for farmers looking for a simple, robust machine whose mowing quality is widely recognized.

Specifications
Working width (m)3.11
Number of discs with protecting skids8 (in treated steel)
Knife attachmentFAST-FIT or bolt
Modular disc bearing stations removable from the outsideAs standard
Swath width (m)1.30 on average
Swathing system2 x 2 belt-driven drums
PTO speed (rpm)1000
Transport width (m)2.99
Drive train protectionPROTECTADRIVE system
Weight (kg) 1010
Ground adaptationArticulated connecting rods
Minimum PTO power requirement approx. (kW) for the triple combination32
Minimum PTO power requirement approx. (hp) for the triple combination43

This disc mower is ideal for farmers looking for a simple, robust machine that produces a high quality cut.

This machine is equipped with renowned technologies:

  • The series 100 cutter bar; ensured reliability for a high quality cut and a long service life.
  • PROTECTADRIVE safety; an efficient protection system for the cutter bar in case of impact.
  • Reinforced cover framework; ideal for coping with intensive operations.
  • The very short distance between the cutter bar and the rear wheels ensure excellent ground hugging for clean-cut and even mowing.
  • Swath wheel for perfect swath formation.
Specifications
Working width (m)2
Cutterbars100 series
SecurityPROTECTADRIVE
Number of discs with protecting skids5
Swath width (m)1.40
PTO speed (rpm)540
Setting to transport positionVertical folding
Weight (kg)465
Tractor hydraulic equipment1 SA

A combination that combines high work output with low power consumption and cost-in-use – 3 overlap widths available – pendulum type articulation of the mowing units – hydro-pneumatic suspension – non-stop safety release – OPTIDISC cutter bar.

Specifications
CutterbarsOPTIDISC®
Working width (m)8.20 – 8.45 - 8.75
Number of discs with protecting skids2 x 7
Swath width (m)2 x 2.40
Swath width (m)2.4
PTO speed (rpm)1000
Setting to transport positionHydraulic vertical folding
Transport width (m)2.99
Safety break-backCombined Lift-Control and Non-stop safety
Weight (kg)1760
Minimum power requirement for PTO (kW)88
Minimum power requirement for PTO (hp)120
Tractor hydraulic equipment1 DA + 1SA for the combination
  • LIFT CONTROL ® hydro-pneumatic suspension and NON-STOP safety device
  • built-in hydraulic lift
  • new OPTIDISC® cutterbar
  • cutting components driven through 1st disc on the tractor side
  • hydraulic transport position setting with 90° pivot to the rear.
Specifications
Working width (m)3.51
Number of discs with protecting skids8
Swath width (m)2.8
PTO speed (rpm)1000
Transport width (m)1.70
Safety break-backNon-Stop
Weight (kg)920
Minimum power requirement for PTO (kW)59
Minimum power requirement for PTO (hp)80
Tractor hydraulic equipment1 DA

This disc mower is ideal for coping with more intense operations ; larger surface areas, increased working speeds and driving distances.

The design of the machine is a perfect combination of robustness, reliability and operating comfort.
The 100 series cutter bar; ensured reliability for a high quality cut and a long service life.

  • PROTECTADRIVE safety; an efficient system of protection for the cutter bar in case of impact.
  • Reinforced cover framework; ideal for coping with intensive operations.
  • A reinforcement bracket links the bevel gearbox to the rear stiffener of the cutter bar, making it highly rigid and creating increased resistance for difficult operating conditions.
  • The very short distance between the cutter bar and the rear wheels ensures excellent ground hugging for clean-cut and even mowing.
  • Swath wheel for perfect swath formation.
  • Setting to transport position, by hydraulic pivot, from the tractor cab.
Specifications
Working width (m)3.1
Cutterbars100 series
SecurityPROTECTADRIVE
Number of discs with protecting skids8
Swath width (m) 2.40
PTO speed (rpm) 540
Setting to transport position After manual folding of front curtain. or with optional hydraulic rear pivot system without leaving the driving seat
Weight (kg) 716
Tractor hydraulic equipment 1 SA + 1 DA if with hydraulic pivot