KUHN kaarutid on konstrueeritud niidetud heina paremaks laialipaiskamiseks ja ümberkeeramiseks kõikides tingimustes. Need kaarutid on lihtsad, kompaktsed, kerged ja hästi sobivad ka ebatasastele põldudele. Järelveetavate kaarutite tootlikkus võib olla suurem kui 10 ha/h. Kõik mudelid on transpordiasendis väga kompaktsed ja teedel liikumiseks sobilike mõõtmetega.

  • Rippkaarutid
  • Järelveetavad kaarutid

Narrow plots and points need your attention ! They are no longer a problem for users of the new GF 8712 Gyrotedders with HLC rotor lift system (Headland Lift Control). You can raise all rotors at least 50 cm from the ground in less than 5 seconds, simply, with the tractor’s control unit. This feature also reduces the risk of impurities contaminating your forage at headlands and ensures that forage is not tedded again and again.

Upgrade from 8 rotors to 10 without changing tractors ! The machine can be coupled to small tractors in total safety. Its 10.80 m working width is reduced to an impressive 2.99 m for road transport. The patented system that connects the headstock to the frame ensures excellent load transfer, making the machine perfectly stable on bends and providing ideal road suspension.

Small rotors that save 33% in drying time*. With specific machine features small diameter rotors, DIGIDRIVE system, equal rotor spacing, asymmetrical tines), tedding quality and ground following are as good as with a 4 or 6-rotor tedder.

And the practical aspects:

  • The famous DIGIDRIVE drive system and sealed rotors reduce daily maintenance
  • The hydraulic oblique setting (optional) stops forage from being projected onto neighbouring plots.

* test report 6245 F, 11/14 by DLG.
* rapport de test 6245 F, 11/14 de DLG

Specifications
DIN working width 11220 (m) 10.8
Number of rotors 10
Number of tine arms per rotor 6
Transport width (m) 2.99
Transport Height (m) 3.65
Setting into oblique position As optional equipment (rods+cylinder)
Rotor lift on headlands As optional equipment
Wheel deflectors As standard
Tine deflectors As standard
Linkage3 points - Cat. 2
Weight approx. (kg) 1620
Pitch angle setting 2 positions
Free wheel As standard
Rotor drive By DIGIDRIVE couplings in forged. case-hardened steel
Setting to transport position Hydraulic vertical folding
Stabilisation2 powerful shock absorbers + suspension springs
Tractor hydraulic equipment 1 DA
Minimum power requirement for PTO (kW) 50
Minimum power requirement for PTO (hp) 55
Lighting and signalling (in conformity with order 04/05/06) As standard

Exceptional work output and reduced drying time. Make the most of favorable weather windows to harvest top quality forage.

Take advantage of the many original features to facilitate operations in any conditions.

  • A windrow clearance feature for headland turns and clearing obstacles.
  • Ground following by each rotor independently, with the exclusive GSC system.
  • 13.00 m working width but transport width reduced to 2.40 m.
  • Centralized pitch angle setting to protect plant cover.

Not forgetting technologies fundamental to producing high quality forage:

  • Small diameter rotors with significant pitch angle for efficient forage turning and uniform spread.
  • Exclusive DIGIDRIVE multiple finger coupling drive system for maximum reliability.
Specifications
DIN working width 11220 (m) 13
Number of rotors 12
Number of tine arms per rotor 6
Transport width (m) 2.4
Transport Height (m) 2.68
Transport length (m) 6.5
Weight approx. (kg) 2800
Pitch angle setting 2 positions
Rotor drive Per DIGIDRIVE finger couplings in forged. case-hardened steel
PTO speed (rpm) 1000
TyresUnder rotors: super balloon 16 x 6.50 - 8 Transport frame: 10.0/75-15.3 or 13.0/55/16 as an option
Setting to transport position Assisted by electronic control box with outer rotor folding. then frontward swivel. and transport on specific wheelset
Minimum power requirement for PTO (kW) 59
Minimum power requirement for PTO (hp) 80